If Borderlands 3 won’t launch on PC, start by verifying the game files in Steam or the Epic Games Launcher. Then update your graphics driver from NVIDIA, AMD or Intel, and run the game as administrator. If the game started failing after you picked DirectX 12 in its settings, switch it back to DirectX 11 in its config file. That one change fixes many cases where the game hangs on a black screen or the loading screen. Reinstalling is the last step, after all of these.
Why Borderlands 3 won’t launch
Borderlands 3 came out on PC in September 2019. It has a long history of launch problems: the game won’t open, closes during the intro videos, or hangs on a black screen. The usual causes are damaged game files, old graphics drivers, a missing Windows update, permission problems, and the game’s DirectX 12 mode.
Most of these take a few minutes to fix. Work through the solutions below in order. They start with the quickest and safest.
Check that your PC meets the requirements first

Before you try any fix, make sure your PC can run the game. These are the official minimum and recommended specs that Gearbox and 2K published for the PC version:
| Component | Minimum | Recommended |
|---|---|---|
| Operating system | Windows 7, 8 or 10 (latest service pack) | Windows 7, 8 or 10 (latest service pack) |
| Processor | AMD FX-8350 or Intel i5-3570 | AMD Ryzen 5 2600 or Intel i7-4770 |
| Memory | 6 GB RAM | 16 GB RAM |
| Graphics card | AMD Radeon HD 7970 or NVIDIA GeForce GTX 680 2GB | AMD Radeon RX 590 or NVIDIA GeForce GTX 1060 6GB |
| Storage | 75 GB | 75 GB |
| DirectX | DirectX 11 or newer | DirectX 11 or newer |
Those operating system lines date from 2019. Today the game runs on Windows 11 and on Windows 10 version 22H2. Windows 10 reached end of support on October 14, 2025. If you still use it, enroll in Microsoft’s Extended Security Updates program. Microsoft has extended consumer ESU to October 12, 2027.
If Windows shows its own errors at startup, before you open any launcher, fix those first. One example is the intel optane memory pinning unable to load dll message. A game fix won’t help while Windows itself has a problem.
If your PC meets the requirements and the game still won’t launch, try the solutions below.
Solution 1: Verify the game files
Damaged or missing game files are one of the most common reasons Borderlands 3 won’t start. Your launcher can check every file and replace any bad ones. Your saved games are not affected.
In the Epic Games Launcher:
- Open the Epic Games Launcher and go to Library.
- Click the three dots next to Borderlands 3.
- Select Manage.
- Click Verify and wait for it to finish. This can take a while for a 75 GB game.
On Steam:
- Open your Steam Library and right-click Borderlands 3.
- Select Properties, then open the Installed Files tab. Older Steam versions call it Local Files.
- Click Verify integrity of game files and wait for the scan to finish.
When the check is done, launch Borderlands 3 again to see if that was the problem.
Solution 2: Update your device drivers

Old, broken or missing graphics drivers often cause launch failures and crashes. Get drivers straight from your graphics card maker or through Windows Update. Don’t use third-party “driver updater” programs. They can install the wrong driver, and you don’t need them.
- Find out which graphics card you have. Press Windows + X, select Device Manager, and expand Display adapters.
- Get the latest driver from the maker’s own tool:
– NVIDIA: the NVIDIA app, or the drivers page on nvidia.com.
– AMD: AMD Software: Adrenalin Edition, or the drivers page on amd.com.
– Intel: Intel Driver & Support Assistant, from intel.com. - Install the driver, restart your PC and launch the game again.
If your PC is a laptop from a brand like Dell, HP or Lenovo, the maker’s support page may have drivers built for your exact model. Use those if the generic driver causes problems.
Newer drivers also fix fullscreen and display problems, like the game freezing when you switch windows or alt tab not working.
Solution 3: Run the game as administrator
Sometimes Borderlands 3 can’t read certain files under a normal user account, and then it won’t launch. Running it with administrator rights gets around this.
- On the desktop, right-click the Epic Games Launcher or Steam icon and select Properties.
- Open the Compatibility tab and tick Run this program as an administrator.
- Click Apply, then OK.
- Open the folder where Borderlands 3 is installed. Go to OakGame\Binaries\Win64, right-click Borderlands3.exe and repeat steps 1 to 3.
- Launch Borderlands 3 again to see if the problem is fixed.
If the problem is still there, move on to the next solution.
Solution 4: Run Windows Update

A missing Windows update can stop the game from launching, especially updates for DirectX and the Visual C++ runtimes.
On Windows 11:
- Press Windows + I to open Settings.
- Select Windows Update.
- Click Check for updates. Install everything it offers, including any updates under Advanced options > Optional updates.
On Windows 10:
- Press Windows + I to open Settings.
- Select Update & Security, then Windows Update.
- Click Check for updates.
Restart your PC after the updates install, even if Windows doesn’t ask you to.
Solution 5: Switch Borderlands 3 back to DirectX 11
If the game stopped launching right after you set it to DirectX 12, it may now hang on a black screen or the loading screen. You can’t reach the in-game menu to change it back, so edit the setting in the config file.
- Close the game and the launcher.
- Open File Explorer and go to Documents\My Games\Borderlands 3\Saved\Config\WindowsNoEditor.
- Right-click GameUserSettings.ini and open it in Notepad.
- Find the line PreferredGraphicsAPI=DX12 and change it to PreferredGraphicsAPI=DX11.
- Save the file and launch the game.
The config file only appears after the game has run at least once. If the folder is empty or the file is missing, skip this fix.
Solution 6: Reinstall the game
If nothing above worked, reinstall Borderlands 3. Uninstall it first so all of its files are removed.
- Uninstall the game from your launcher. In Epic, click the three dots next to the game in your Library and select Uninstall. In Steam, right-click the game and select Manage > Uninstall.
- If the game is still listed in Windows, press Windows + R, type appwiz.cpl and press Enter. Find Borderlands 3, right-click it and select Uninstall.
- Restart your PC, then install Borderlands 3 again from the same launcher.
A fresh install usually gets the game working. If it still won’t start, reinstall the Epic Games Launcher or Steam as well. Your Steam and Epic libraries stay tied to your account, so reinstalling a launcher won’t lose any games.
If Borderlands 3 still won’t launch
Some launch problems come from outside the game. Two quick checks often help:
- Temporarily add Borderlands 3 as an exception in any third-party antivirus program.
- Unplug USB devices other than your keyboard, mouse and controller.
If the game crashes during the intro videos, check your PC or motherboard maker’s support page for a newer BIOS.
If the game opens but has no sound, or Windows shows an audio renderer error, that’s a sound device problem and needs a separate fix. If nothing in this guide works, contact 2K Support with your PC specs and the exact error message. Contact Epic Games or Steam support if the launcher itself won’t install or run.
FAQ
Why does Borderlands 3 close right after I click Play?
Usually it’s damaged game files, an old graphics driver or a permission problem. Verify the files in your launcher first, then update your graphics driver, then run the game as administrator. If you recently switched to DirectX 12, change it back to DirectX 11 in GameUserSettings.ini.
Will verifying the game files delete my saves?
No. Verifying only checks the installed game files and replaces any that are damaged or missing. Your characters and progress are stored separately and are not touched.
Does Borderlands 3 run on Windows 11?
Yes. The official requirements list Windows 7, 8 and 10 because they were published in 2019, but the game runs on Windows 11. Keep Windows and your graphics driver fully updated for the best results.
Should I use DirectX 11 or DirectX 12 for Borderlands 3?
DirectX 11 is the safer choice if you’ve had launch or loading problems, because the DirectX 12 mode is the setting most often linked to black screens and hangs. You can try DirectX 12 on newer hardware. If the game stops launching, set PreferredGraphicsAPI back to DX11 in the config file.
Do I need a driver updater program to fix Borderlands 3?
No. Windows Update and the official tools from NVIDIA, AMD and Intel give you the right drivers for free. Third-party driver updaters can install the wrong driver and often push paid upgrades.
Sources
- Epic Games: How do I verify game files in the Epic Games Launcher?
- Steam Support: Verify integrity of game files
- GameSpot: Borderlands 3 PC system requirements and specs confirmed
- Windows Central: List of Borderlands 3 known bugs and launch issues
- BleepingComputer: Microsoft extends free Windows 10 ESU support to October 2027













