CompatTelRunner.exe is a genuine Windows file, so you don’t need to delete it. If it’s slowing your PC, the safest fix is to disable the “Microsoft Compatibility Appraiser” task in Task Scheduler, or to set Windows to send only required diagnostic data. That stops the heavy compatibility scans on Windows 10 and on Windows 11 up to version 26H2. If the process still misbehaves after that, run a Microsoft Defender scan and the DISM and SFC repair tools, and install the latest Windows updates.
What CompatTelRunner.exe is
CompatTelRunner.exe is the program behind Microsoft Compatibility Telemetry. It’s part of Windows itself. It checks whether your installed apps and hardware are compatible with Windows, and that information helps Windows decide which updates and upgrades your PC can take. In Task Manager it usually shows up as “Microsoft Compatibility Telemetry”.
The real file is in the C:\Windows\System32 folder. It collects technical data about your computer and how it performs, then sends that data to Microsoft as part of Windows diagnostic data. Microsoft uses this data to fix compatibility problems and to decide which PCs are ready for new feature updates.
Why CompatTelRunner.exe causes problems
Many Windows 10 and Windows 11 users find this process using a very high share of their CPU and disk while it scans files, then sending data over the internet. On older PCs, especially ones with a hard drive instead of an SSD, a scan can make the whole system crawl for a while. Some users also report a slower internet connection during a scan.
The process runs on a schedule through the Compatibility Appraiser task. That’s why the slowdowns tend to come and go instead of lasting all day.
Some people also want to turn it off for privacy reasons. The file isn’t malware. It’s a normal part of Windows. Turning off optional diagnostic data and the scheduled task limits what gets sent. On Home and Pro editions, Windows still sends the minimum “required” diagnostic data.
Check that CompatTelRunner is the real cause
Before you change any settings, make sure this process is what’s slowing your PC:
- Press Ctrl + Shift + Esc to open Task Manager.
- On the Processes tab, look for “Microsoft Compatibility Telemetry” near the top of the CPU or Disk column.
- Open the Details tab, right-click CompatTelRunner.exe and choose “Open file location”. The genuine file opens in C:\Windows\System32.
- If it runs from any other folder, treat it as possible malware and go straight to the Microsoft Defender scan below.
Not every slowdown or error comes from telemetry. Problems such as err_connection_reset in your browser, the audio renderer error youtube shows when audio drivers misbehave, or hulu plaunk65 in a streaming app have their own causes and fixes.
How to fix the CompatTelRunner.exe error
The fixes below run from the quickest and safest to the most involved. After each one, restart your PC and check whether the problem is gone before moving on to the next.
Method 1: Disable the CompatTelRunner.exe task in Task Scheduler
This is the safest fix. It stops the scheduled compatibility scan without touching any system files, and it works the same way on Windows 10 and Windows 11.
- Type “Task Scheduler” in the Windows search box and open it.
- In the left pane, expand Task Scheduler Library > Microsoft > Windows > Application Experience.
- Right-click “Microsoft Compatibility Appraiser”, choose “Disable”, and confirm.
- If you want, you can also disable the other tasks in this folder. Then check whether the problem is solved.
A large Windows feature update can sometimes turn the task back on. If the slowdowns come back after an update, repeat these steps.
Method 2: Disable Microsoft Compatibility Telemetry with Command Prompt
This method stops and disables the two telemetry services and sets the diagnostic data policy in the registry. It’s a good choice on Windows 10 Home and Windows 11 Home, which don’t include the Group Policy Editor.
- Press Windows + X and choose “Terminal (Admin)” on Windows 11, or “Windows PowerShell (Admin)” or “Command Prompt (Admin)” on Windows 10.
- Type each command below and press Enter after each one. Type
sc.exein full, because in PowerShell plainscmeans a different command.
sc.exe stop DiagTrack
sc.exe config DiagTrack start= disabled
sc.exe stop dmwappushservice
sc.exe config dmwappushservice start= disabled
reg add "HKLM\SOFTWARE\Policies\Microsoft\Windows\DataCollection" /v AllowTelemetry /t REG_DWORD /d 0 /f
- Wait for each command to finish, then restart your computer and check whether the problem is solved.
DiagTrack is the “Connected User Experiences and Telemetry” service. Older guides tell you to delete it with sc delete. Disabling it does the same job, and you can undo it later by setting the start type back to automatic. The AllowTelemetry value of 0 only fully applies on Enterprise and Education editions. On Home and Pro, Windows treats it as 1, which is the “required” level.
Method 3: Don’t delete CompatTelRunner.exe
Old guides told you to take ownership of CompatTelRunner.exe in System32, give yourself Full Control and delete it. Skip this step. The file is a protected Windows component. Deleting it can cause errors with Windows Update. The SFC tool or the next cumulative update will usually just put it back, and changing permissions on System32 files can create new problems.
Disabling the scheduled task in Method 1 is a safer way to stop the scans.
Method 4: Limit telemetry data with Group Policy
The Group Policy Editor isn’t included in Home editions of Windows 10 and 11. It’s available in editions such as Pro, Pro Education, Enterprise and Education. On Home, use Method 2 or the Settings app instead.
- Press Windows + R, type
gpedit.mscand click OK to open the Local Group Policy Editor. - Go to Computer Configuration > Administrative Templates > Windows Components > Data Collection and Preview Builds.
- Double-click “Allow Diagnostic Data”. On older Windows 10 systems this setting is called “Allow Telemetry”.
- Select “Enabled”, then pick the lowest level in the Options list: “Diagnostic data off (not recommended)” on Enterprise and Education, or “Send required diagnostic data” on Pro. Click Apply, then OK.
Set it to “Enabled” with a low level, not “Disabled”. If you choose “Disabled”, the policy stops controlling the level and users can raise it again in Settings.
You can make a similar change without Group Policy. On Windows 11, go to Settings > Privacy & security > Diagnostics & feedback and turn off “Send optional diagnostic data”. On Windows 10, go to Settings > Privacy > Diagnostics & feedback and choose “Required diagnostic data”.
Method 5: Scan for malware with Windows Security
If CompatTelRunner.exe runs from anywhere other than System32, or keeps using lots of CPU after the fixes above, scan for malware. Some malware uses names of real system files to hide.
- Type “Windows Security” in the Windows search box and open it.
- Go to Virus & threat protection > Scan options, select “Full scan” and click “Scan now”.
- When the scan finishes, check whether the problem is solved.
If the full scan finds something it can’t remove, run “Microsoft Defender Antivirus (offline scan)” from the same Scan options page. It restarts your PC and scans before Windows loads.
Method 6: Run DISM and SFC scans
Damaged system files can make the compatibility scan get stuck in a loop. DISM repairs the Windows component store, and SFC then uses that store to fix protected system files. That’s why it’s best to run DISM first.
- Press Windows + X and open Terminal (Admin), Windows PowerShell (Admin) or Command Prompt (Admin).
- Run the DISM scan. Type the command below and press Enter:
DISM /Online /Cleanup-Image /RestoreHealth
- When it finishes, run the SFC scan. Type the command below and press Enter:
sfc /scannow
- Wait for both scans to finish, then restart your computer and check whether the problem is solved.
DISM can look stuck at 20% or 62% for several minutes. That’s normal, so let it finish.
Method 7: Update Windows
Microsoft often fixes telemetry and compatibility bugs in cumulative updates. Installing the latest updates is worth doing even if an earlier fix already worked.
- On Windows 11, open Settings > Windows Update. On Windows 10, open Settings > Update & Security > Windows Update.
- Click “Check for updates” and install everything offered. Restart when asked, then check whether the problem is solved.
Windows 10 reached end of support on October 14, 2025. A Windows 10 PC only gets security updates if it’s enrolled in the Consumer Extended Security Updates (ESU) program, which Microsoft has extended to October 12, 2027. Windows 11 version 26H2 came out on September 29, 2026, as a small update for PCs already running versions 24H2 or 25H2.
If nothing works
If CompatTelRunner.exe still uses lots of CPU after all of these fixes, the problem is probably deeper than this one process. A failing hard drive, a corrupted user profile or broken update files can all cause it. Back up your files, then use Settings > System > Recovery > “Fix problems using Windows Update” on Windows 11, or a repair install from Microsoft’s official Windows download page. If the PC came from a work or school account, ask your IT department first, because they may manage these settings centrally.
FAQ
Is CompatTelRunner.exe a virus?
No. The real CompatTelRunner.exe is a Microsoft file stored in C:\Windows\System32. If you find a file with that name anywhere else, run a full Microsoft Defender scan, because malware sometimes copies the names of real system files.
Is it safe to disable Microsoft Compatibility Telemetry?
Yes. Disabling the Microsoft Compatibility Appraiser task or lowering diagnostic data to “required” won’t break Windows or stop security updates. The main downside is that Microsoft gets less information about your PC’s compatibility. That can affect how quickly it offers your PC a big feature upgrade.
Can I delete CompatTelRunner.exe?
You shouldn’t. It’s a protected system file, so deleting it means changing System32 permissions, and Windows Update or SFC usually puts it back anyway. Disabling the scheduled task is a safer way to stop the scans.
Why does CompatTelRunner.exe come back after I disable it?
Big Windows feature updates sometimes reset scheduled tasks and services to their default settings. If the high CPU use comes back after an update, check the Application Experience folder in Task Scheduler again and disable the task.
Can I turn off telemetry completely on Windows 11 Home or Pro?
Not completely. The “Diagnostic data off” level only works on Enterprise and Education editions. On Home and Pro, the lowest setting is “required diagnostic data”, which you set under Settings > Privacy & security > Diagnostics & feedback.
How long does a CompatTelRunner scan take?
On most modern PCs with an SSD, a scan takes a few minutes. On older PCs with hard drives it can take much longer. If you can wait, letting it finish once is fine. If it runs for hours or keeps repeating, use the fixes above.
Sources
- Configure Windows diagnostic data in your organization (Microsoft Learn)
- Changes to Windows diagnostic data collection (Microsoft Learn)
- Windows 11 release information (Microsoft Learn)
- How to get the Windows 11 2026 Update (Windows Experience Blog)












