TTB Tech Help

Practical tech help, security alerts and big tech news in plain English

How To Fix Valorant VAN9003 Error

How To Fix Valorant VAN9003 Error In 2023

VAN9003 means Riot Vanguard, Valorant’s anti-cheat, won’t start because Secure Boot is turned off on your PC. On Windows 11, Riot requires both Secure Boot and TPM 2.0. To fix it, open your PC’s UEFI (BIOS) settings and set the boot mode to UEFI instead of Legacy or CSM. Then turn Secure Boot on, make sure TPM 2.0 is enabled, restart and launch Valorant again. Network, firewall and VPN problems rarely cause this error, so check Secure Boot before anything else.

You start Valorant and get a VAN9003 error instead of the menu. The message usually says this build of Vanguard requires Secure Boot to be enabled, or that it is “out of compliance.” This guide covers what causes it and the fixes, starting with the most likely one.

What the Valorant VAN9003 error means

VAN9003 is a Vanguard startup error. It shows up when you launch Valorant on a PC where Secure Boot is off or not working. Riot’s own support pages say Vanguard needs Secure Boot to run, and the error comes back every time until that requirement is met.

Most reports of this error come from Windows 11, where Vanguard has required TPM 2.0 and Secure Boot since 2021. VAN9001 is a closely related code that usually points to TPM 2.0 being off. Riot treats the two errors the same way.

Common causes of the Valorant VAN9003 error

  • Secure Boot is turned off. This is the cause in most cases. Many PCs ship with Secure Boot disabled, and a BIOS reset or BIOS update can switch it off again.
  • The PC boots in Legacy or CSM mode. Secure Boot only works in UEFI mode. If CSM (Compatibility Support Module) is on, Secure Boot can look enabled in the BIOS but never actually start.
  • The system drive uses MBR instead of GPT. Older Windows installs often use the MBR partition style, which can’t boot in UEFI mode until you convert it.
  • TPM 2.0 is disabled. On AMD boards this setting is called fTPM, and on Intel boards it is called PTT. Windows 11 needs it, and Vanguard checks it alongside Secure Boot.
  • Vanguard isn’t running or is damaged. If Secure Boot and TPM are both on, the Vanguard service (vgc) may not be starting, or the install may be corrupt.
  • Outdated BIOS or Windows. Riot started requiring BIOS updates on some affected motherboards in December 2025 (more on this below). Very old Windows builds are also no longer supported.

Riot server problems and network faults cause other Valorant errors, but they almost never cause VAN9003.

How to fix the Valorant VAN9003 error

Work through the fixes in this order. The first two solve the error for most players.

Check whether Secure Boot is on

This check takes about a minute in Windows and tells you which fix you need.

  1. Press Windows + R, type msinfo32 and press Enter.
  2. Click System Summary and find BIOS Mode and Secure Boot State.
  3. BIOS Mode: UEFI with Secure Boot State: On means Secure Boot is already working. Skip to the Vanguard fix further down.
  4. BIOS Mode: UEFI with Secure Boot State: Off means you only need to turn Secure Boot on in the firmware.
  5. BIOS Mode: Legacy means you have to switch the PC to UEFI first, which may also mean converting the drive to GPT.

To check TPM, press Windows + R, type tpm.msc and look for Specification Version: 2.0.

Turn on Secure Boot and TPM 2.0 in UEFI

  1. In Windows 11, go to Settings > System > Recovery, then click Restart now next to Advanced startup.
  2. Choose Troubleshoot > Advanced options > UEFI Firmware Settings > Restart. You can also press the BIOS key while the PC starts. This is usually Delete, F2 or F10, depending on the maker.
  3. Find the Boot or Security tab. Set Boot Mode to UEFI and set CSM Support to Disabled.
  4. Set Secure Boot to Enabled. If it is greyed out, set the Secure Boot mode to Standard, or choose Install default keys or Restore factory keys.
  5. Turn on TPM, fTPM (AMD) or Intel PTT (Intel).
  6. Save and exit, usually with F10. Run msinfo32 again to confirm Secure Boot State: On.

Menu names vary between ASUS, MSI, Gigabyte, ASRock, Dell, HP and Lenovo. If you can’t find a setting, check your motherboard or PC maker’s support page for your model.

If the PC won’t boot after you disable CSM, go back into the BIOS and turn CSM back on. That means your drive is still MBR, so do the next fix first.

Convert the system drive from MBR to GPT

Microsoft’s MBR2GPT tool converts the Windows system drive to GPT without deleting your files. Back up first anyway, because switching the drive back to MBR later means wiping it completely.

  1. If BitLocker is on, suspend it first in Control Panel > BitLocker Drive Encryption.
  2. Open Command Prompt as administrator.
  3. Run mbr2gpt /validate /allowFullOS. If it reports a failure, stop there. Your partition layout isn’t supported, and a technician or a clean Windows install is the safer route.
  4. If validation passes, run mbr2gpt /convert /allowFullOS.
  5. Restart into the BIOS, set the boot mode to UEFI, disable CSM and turn Secure Boot on as described above.

Check your internet connection

A bad connection doesn’t cause VAN9003. It is still worth a quick check if the error changes to a connection error after you fix Secure Boot:

  • Restart your router: A simple router restart often fixes connection problems.
  • Use a wired connection: If you are on Wi-Fi, try an Ethernet cable for a more stable connection.

Adjust your firewall settings

Firewalls rarely trigger VAN9003, but they can stop Vanguard or the Riot Client from connecting. Add an exception instead of turning the firewall off:

  • Allow the apps through Windows Firewall: Go to Windows Security > Firewall & network protection > Allow an app through firewall. Click Change settings and make sure Riot Client, VALORANT and Vanguard are allowed on private and public networks.
  • Third-party security suites: If you use Norton, Bitdefender or a similar suite, add the Riot Games folder to its allowed list. Don’t leave protection switched off.

Check your VPN configuration

A VPN has nothing to do with Secure Boot, but it can cause separate connection errors with Riot’s servers:

  • Disable the VPN: Turn off your VPN while you play. If the error goes away, play without the VPN.

Repair or reinstall Riot Vanguard

If msinfo32 shows Secure Boot on, TPM 2.0 is active and the error still appears, Vanguard itself is the likely problem.

  1. Restart the PC once. Vanguard’s driver only loads at boot, so a fresh restart after any BIOS change matters.
  2. Press Windows + R, type services.msc, open vgc, set Startup type to Automatic, then restart. Players have reported that this fixes the error, though Riot hasn’t documented it as an official fix.
  3. If that doesn’t help, go to Settings > Apps > Installed apps, find Riot Vanguard and choose Uninstall. Restart, then open the Riot Client. It reinstalls Vanguard automatically. Restart again before you launch Valorant.

Update Windows, your BIOS and your graphics drivers

Out-of-date firmware and system software can stop Vanguard’s checks from passing:

  • Windows: Go to Settings > Windows Update and install everything that’s offered. Microsoft ended support for Windows 10 on 14 October 2025, so Windows 11 is the safer platform for Valorant.
  • BIOS: In December 2025, Riot said some ASUS, Gigabyte, MSI and ASRock boards reported pre-boot DMA protection as active before IOMMU was fully set up. Vanguard now shows a VAN:Restriction error on affected PCs until you install the maker’s fixed BIOS. Only download BIOS files from your motherboard maker’s official support page. After the update, check that Secure Boot and IOMMU are still on, because flashing a BIOS often resets them.
  • Graphics drivers: These don’t cause VAN9003, but keep them current with the NVIDIA app, AMD Software: Adrenalin Edition or Intel’s driver tools.

Check Riot Games server status

If every check above passes, rule out a problem on Riot’s side before you contact support:

  • Check Riot’s service status page and official accounts: Riot posts outages and maintenance for Valorant there.
  • Wait for maintenance to finish: If Riot is running maintenance, wait for it to end before you try again.

If the error is still there after all of this, send a ticket to Riot Support from the Valorant support site. Include your msinfo32 System Summary and the exact error text.

Vanguard On-Demand mode and VAN9003

In June 2026, Riot added an optional Vanguard On-Demand mode. It loads the anti-cheat when you start a Riot game and unloads it when you quit. It needs Windows 11 25H2 with Secure Boot, TPM 2.0, VBS, HVCI (Memory Integrity) and IOMMU all turned on. If you don’t opt in, Vanguard keeps its usual always-on behaviour, and the Secure Boot fix above still clears VAN9003 either way.

FAQ

Is it safe to turn on Secure Boot for Valorant?

Yes. Secure Boot is a standard UEFI security feature that blocks unsigned bootloaders and boot-level malware. Microsoft recommends it for Windows 11. The biggest risk is turning off CSM while your drive is still MBR. The PC then won’t boot until you turn CSM back on or convert the drive. Some older graphics cards or peripherals that only have legacy option ROMs may also fail to initialise in UEFI-only mode, which on affected hardware can leave you without a display or access to the firmware settings.

Do I need TPM 2.0 to fix VAN9003?

On Windows 11, yes. Vanguard checks for TPM 2.0 as well as Secure Boot, and a missing TPM usually shows up as the related VAN9001 error. Most PCs from 2017 or later have firmware TPM (AMD fTPM or Intel PTT), and you just need to switch it on in the BIOS.

Why does VAN9003 come back after a BIOS update?

Flashing a BIOS often resets everything to defaults, and that can turn CSM back on or switch Secure Boot off. After any BIOS update, go back into UEFI, confirm Secure Boot, TPM and IOMMU are on, then check msinfo32 again.

Can I play Valorant without Secure Boot?

Not on Windows 11. Vanguard will keep showing VAN9003 until Secure Boot is on. Windows 10 hasn’t had the same strict requirement for every player, but Microsoft no longer supports it, and Riot’s newer security checks are aimed at Windows 11.

Will converting my drive with MBR2GPT delete my games?

No. MBR2GPT changes the partition style and keeps your files and installed programs. Going back to MBR later requires wiping the disk, and the conversion can fail on unusual partition layouts, so back up important files and always run the /validate step first.

Does reinstalling Valorant fix VAN9003?

Usually not, because the error comes from your firmware settings, not the game files. If Secure Boot and TPM are already on, reinstalling Riot Vanguard, not Valorant, is the reinstall that helps.

Sources

  • Riot Games Support: Error VAN 9003
  • Riot Games Support: Enabling IOMMU
  • Microsoft Support: Windows 11 and Secure Boot
  • Microsoft Learn: MBR2GPT